HydroTap Elite Plus BCS Tap Specifications:

• Style: HydroTap Elite Plus – includes child safety lock
• Hole Size: (35mm) 1-3/8″
• Available Finishes: Chrome, Brushed Chrome, Matte Black, Brushed Gold, Brushed Nickel, Gunmetal
• Installation: Over Sink or On Drip Tray (Optional Font – see accessories)
• Flow Rate Max: 1.8 gpm / 6.81 lpm
• Sparkling Water Flow Rate: 0.4 gpm / 1.51 lpm

120V BCS Command Center Specifications:

• Water Pressure: Min 37psi – Max 100psi (2.60 – 7.03kg/cm2 ) with a minimum flow rate of 1 gpm (3.79lpm)
• Water Connection: ½” BSP – isolation valve is required within 3’ (0.9m) of the installation
• Integral Water Values: All HydroTap systems are fitted with a Dual Check Valve and a 73psi (5.13kg/cm2) Pressure Limiting Valve
• Water Supply Requirements: Potable drinking water supply
• Optimal Total Dissolved Solids (TDS) Range: TDS Min 50ppm – Max 150ppm
• Integral Water Filter: 0.2 micron, 1 size – replace every 1,100 gallons / 4,163 liters or 12 months
• Power Rating: 110-120V, 50-60Hz, 15 amp power supply with a NEMA 5-15 outlet
• Dimensions (WxDxH): 13.3” x 18.2” x 13.1” / 339mm x 462mm x 333mm
• Minimum Air Gap: Minimum of 2” / 50mm clearance on left and right side and 8” / 200mm above
• Minimum Cabinet Size: 18” wide x 24” deep / 457mm wide x 610mm deep
• Maximum Hose Connection Length: 3’ / 0.9m (tap to command center)
• Minimum Distance Needed for Installation: 15” / 381mm (interior wall to garbage disposal)
• Dry Weight: 75lbs / 34kg
• Product Approvals: IAPMO – NSF/ANSI 372, 42, 53, CSA B483.1, ASSE 1023, ASSE 1087; cUL; CEC
• Warranty: 2 years
• Compatible CO2 Cylinder: Zip Water 1.5lb CO2 or 5lb CO2 (if space allows) with CGA-320 fitting
• CO2 Operating Pressure: Min 39psi – Max 44psi / Min 2.74 – Max 3.09kg/cm2

HydroTap Elite Plus BC Tap Specifications:

• Style: HydroTap Elite Plus – includes child safety lock
• Hole Size: (35mm) 1-3/8″
• Available Finishes: Chrome, Brushed Chrome, Matte Black, Brushed Gold, Brushed Nickel, Gunmetal
• Installation: Over Sink or On Drip Tray (Optional Font – see accessories)
• Flow Rate Max: 1.8 gpm / 6.81 lpm

120V BC Command Center Specifications:

• Water Pressure: Min 37psi – Max 100psi (2.60 – 7.03kg/cm2 ) with a minimum flow rate of 1 gpm (3.79lpm)
• Water Connection: ½” BSP – isolation valve is required within 3’ (0.9m) of the installation
• Integral Water Values: All HydroTap systems are fitted with a Dual Check Valve and a 73psi (5.13kg/cm2) Pressure Limiting Valve
• Water Supply Requirements: Potable drinking water supply
• Optimal Total Dissolved Solids (TDS) Range: TDS Min 50ppm – Max 150ppm
• Integral Water Filter: 0.2 micron, 1 size – replace every 1,100 gallons / 4,163 liters or 12 months
• Power Rating: 110-120V, 50-60Hz, 15 amp power supply with a NEMA 5-15 outlet
• Dimensions (WxDxH): 18” wide x 24” deep / 457mm wide x 609mm deep
• Minimum Air Gap: Minimum of 2” / 50mm clearance on left and right side and 8” / 200mm above
• Minimum Cabinet Size: 18” wide x 24” deep / 457mm wide x 610mm deep
• Maximum Hose Connection Length: 3’ / 0.9m (tap to command center)
• Minimum Distance Needed for Installation: 15” / 381mm (interior wall to garbage disposal)
• Dry Weight: 66lbs / 30kg
• Product Approvals: IAPMO – NSF/ANSI 372, 42, 53, CSA B483.1, ASSE 1023, ASSE 1087; cUL; CEC
• Warranty: 2 years

HydroTap Elite Plus CS Tap Specifications:

• Style: HydroTap Elite Plus
• Hole Size:  1-3/8″ (35mm)
• Available Finishes: Chrome, Brushed Chrome, Matte Black, Brushed Gold, Brushed Nickel, Gunmetal
• Installation: Over Sink or On Drip Tray (Optional Font – see accessories)
• Flow Rate Max: 1.8 gpm / 6.81 lpm

120V CS Command Center Specifications:

• Water Pressure: Min 37psi – Max 100psi (2.60 – 7.03kg/cm2 ) with a minimum flow rate of 1 gpm (3.79lpm)
• Water Connection: ½” BSP – isolation valve is required within 3’ (0.9m) of the installation
• Integral Water Values: All HydroTap systems are fitted with a Dual Check Valve and a 73psi (5.13kg/cm2) Pressure Limiting Valve
• Water Supply Requirements: Potable drinking water supply
• Optimal Total Dissolved Solids (TDS) Range: TDS Min 50ppm – Max 150ppm
• Integral Water Filter: 0.2 micron, 1 size – replace every 1,100 gallons / 4,163 liters or 12 months
• Power Rating: 110-120V, 50-60Hz, 15 amp power supply with a NEMA 5-15 outlet
• Dimensions (WxDxH): 11” x 16” x 13.1” / 280mm x 406mm x 333mm
• Minimum Air Gap: Minimum of 2” / 50mm clearance on left and right side and 8” / 200mm above
• Minimum Cabinet Size: 18” wide x 15” deep / 457.2mm wide x 381mm deep
• Maximum Hose Connection Length: 3’ / 0.9m (tap to command center)
• Minimum Distance Needed for Installation: 15” / 381mm (interior wall to garbage disposal)
• Dry Weight: 66lbs / 30kg
• Product Approvals: IAPMO – NSF/ANSI 372, 42, 53, CSA B483.1, ASSE 1087; cUL; CEC
• Warranty: 2 years