1-833-233-2358
Where to buy

HydroTap Elite Plus for Office

HydroTap Elite Plus for Office

Elite Plus BCS in Chrome

If minimalist and understated is your desired style, the streamlined design and clean lines of the HydroTap Elite Plus are sure to please in your workplace* environment. With six exquisite finish options to complement a range of remarkable functions the HydroTap Elite Plus is the ultimate in function and design.

*Our commercial systems are ideal for up to 60 users.

Request Quote
Request BIM Library

Please use the expandable menus below to view full product specifications.

240V Elite Plus Boiling, Chilled, Sparkling (BCS) Specifications

Elite Plus BCS Tap Specifications:
  • Style: HydroTap Elite Plus BCS – includes child safety lock
  • Hole Size: 1-3/8″ / 35mm
  • Available Finishes: Chrome, Brushed Chrome, Matte Black, Brushed Gold, Brushed Nickel, Gunmetal
  • Installation: Over sink as a secondary tap or on optional font/drip tray
  • Flow Rate Max: 1.8 gpm / 6.81lpm
240V BCS Command Center:
  • Water Pressure: Min 30psi – Max 75psi (2.60 – 7.03kg/cm2 ) with a minimum flow rate of 1 gpm (3.79 lpm)
  • Water Connection: 1 x ½” BSP – isolation valve is required within 3′ / 0.9m of the installation
  • Integral Water Valves: HydroTaps are fitted with a Dual check valve and a 50psi Pressure Limiting Valve
  • Water Supply Requirements: Potable drinking water supply
  • Optimal Total Dissolved Solids (TDS) Range: TDS Min 50ppm – Max 150ppm
  • Integral Water Filter: 0.2 micron, 1-Size – Replace every 1,100 gallons /4,163 liters or 12 months
  • Power Rating: 220-240V, 50-60Hz, 15 amp power supply with a NEMA 6-15 outlet
  • Dimensions (WxDxH): 13.4″ x 18.2″ x 13.1″ / 339mm x 461mm x 333mm
  • Minimum Air Gap: Clearances are required – 2″ / 50mm Left side, 2″ / 50mm Right side , 8″ / 200mm above
  • Dry Weight: 85lbs / 38.5kg
  • Product Approvals: IAPMO – NSF/ANSI 372, 42 & 53, cUL, CEC
  • Warranty: 2 years
Download Specifications

240V Classic Plus Boiling, Chilled (BC) Specifications

Elite Plus BC Tap Specifications:
  • Style: HydroTap Elite Plus BC – includes child safety lock
  • Hole Size: 1-3/8″ / 35mm
  • Available Finishes: Chrome, Brushed Chrome, Matte Black, Brushed Gold, Brushed Nickel, Gunmetal
  • Installation: Over sink as a secondary tap or on optional font/drip tray
  • Flow Rate Max: 1.8 gpm / 6.8lpm
240V BCS Command Center:
  • Water Pressure: Min 37psi – Max 100psi (2.60 – 7.03kg/cm2 ) with a minimum flow rate of 1 gpm (3.79lpm)
  • Water Connection: 1 x ½” BSP – isolation valve is required within 3′ / 0.9m of the installation
  • Integral Water Valves: HydroTaps are fitted with a Dual Check Valve and a 50psi (3.52kg/cm2) Pressure Limiting Valve
  • Water Supply Requirements: Potable drinking water supply
  • Optimal Total Dissolved Solids (TDS) Range: TDS Min 50ppm – Max 150ppm
  • Integral Water Filter: 0.2 micron, 1.5-Size – Replace every 1,800 gallons / 6,813 liters (~6 months for a large office)
  • Power Rating: 220-240V, 50-60Hz, 15 amp power supply with a NEMA 6-15 outlet
  • Dimensions (WxDxH): 15.5” x 18.3” x 13.1” / 395mm x 464mm x 333mm (excluding vent duct)
  • Minimum Air Gap: Clearances are required – 2″ / 50mm Left side, 2″ / 50mm Right side , 8″ / 200mm above
  • Dry Weight: 66lbs / 30kg
  • Product Approvals: IAPMO – NSF/ANSI 372, 42, 53, CSA B483.1, ASSE 1023, ASSE 1087; cUL; CEC
  • Warranty: 2 years
Download Specifications

240V Elite Plus Chilled, Sparkling (CS) Specifications

Elite Plus CS Tap Specifications:
  • Style: HydroTap Elite Plus CS
  • Hole Size: 1-3/8″ / 35mm
  • Available Finishes: Chrome, Brushed Chrome, Matte Black, Brushed Gold, Brushed Nickel, Gunmetal
  • Installation: Over sink as a secondary tap or on optional font/drip tray
  • Flow Rate Max: 1.8 gpm / 6.8lpm
240V CS Command Center:
  • Water Pressure: Min 37psi – Max 100psi (2.60 – 7.03kg/cm2 ) with a minimum flow rate of 1 gpm (3.79lpm)
  • Water Connection: 1 x ½” BSP – isolation valve is required within 3′ / 0.9m of the installation
  • Integral Water Valves: HydroTaps are fitted with a Dual check valve and a 50psi Pressure Limiting Valve
  • Water Supply Requirements: Potable drinking water supply
  • Optimal Total Dissolved Solids (TDS) Range: TDS Min 50ppm – Max 150ppm
  • Integral Water Filter: 0.2 micron, 1.5 size – replace every 1,800 gallons / 6,813 liters (~6 months for a large office)
  • Power Rating: 220-240V, 50-60Hz, 15 amp power supply with a NEMA 6-15 outlet
  • Dimensions (WxDxH): 11” x 18.9” x 13.1” / 280mm x 480mm x 333mm
  • Minimum Air Gap: Clearances are required – 2″ / 50mm Left side, 2″ / 50mm Right side , 8″ / 200mm above
  • Dry Weight: 80.5lbs / 36.5kg
  • Product Approvals: IAPMO – NSF/ANSI 372, 42, 53, CSA B483.1, ASSE 1023, ASSE 1087; cUL; CEC
  • Warranty: 2 years
Download Specifications

Optional Accessories

Request Quote